Produkterna för proffs och hemmafixare

Crystal clear flexible sealant with high adhesive strength, even on moist surfaces. Adheres well to most materials such as e.g. ceramic tiles, concrete, metals, wood, stone and synthetic materials. Cures quickly, even on wet surfaces. Minimal shrinkage. Can be painted over. Can be used for jointing, sealing and gluing, both indoors and outdoors. Ideal for aesthetic joints in all rooms, as well as in wet rooms or in the kitchen, such as around built-in hobs in the kitchen worktop or around tiles. Has good resistance to chemicals, mold and bacteria, which makes it safe to use in kitchens and bathrooms, among other things. Does not cause corrosion on metal/aluminium. Leaves no stains or discoloration on natural stone, marble, slate, granite, etc. Is very weather and aging resistant, and can therefore also be used outdoors, but not exposed to a lot of direct UV radiation, which can damage the surface and destroy the transparent property. Food approved and according to BREEAMSE emission requirements. Non-toxic and odorless, does not contain phthalates, isocyanates or harmful solvents. Contains no harmful solvents, phthalates or isocyanates, and is according to BREEAM-SE emission requirements. Withstands repeated freeze/thaw in cartridge without losing properties.
Application temperature: +5°C to +40°C.
Temperature resistance: -30 °C to +95°C.

1-component expanding polyurethane joint foam for year-round use. Applied using the included nozzle. Good heat insulating and sound dampening properties. Good adhesion to most common building materials. Used as insulation and filling of cavities and voids, jointing around door and window frames, filling around pipes and penetrations, etc. Can be applied to cold substrates at low temperatures. Forms a homogeneous foam structure even at low humidity. Cured foam can be cut, sanded and painted over. Hardened after 24 hours. For indoor and outdoor use. Free from chlorine, paraffins and halogens.
Temperature range: -10°C to +40°C.

Wide wire staples. Wide wire that gives a larger installation surface to the material. Suitable for attaching e.g. plastic and other non-fibrous materials.
PP-Box: Plastic box.

Cold rolled DC 01 Am/SS 1142-32

Airy cut protection glove with very good fingertip feel. With Dyneema Diamond Technology in Lycra and nylon. Smooth palm dipping in PU. Oil and grease resistant palm. Fiberglass free. For dirty environments. Cut protection level B.

Approved/Certified according to:
CE category 2
EN 420:2003+A1:2009
EN 388:2016 3X42B

Cleaning agent for mainly brake parts but also for other soiled parts. Heptane-based degreaser that evaporates without leaving any residue and thus does not need to be washed afterwards.

Knee pads for placement in knee pad pocket. A light, flexible, comfortable and pre-bent knee pad. Temperature resistance -30°C to +60°C. Contains neither heavy metals nor bromine products according to EN 340. The knee protector is of type 2 which meets the requirements of EN14404+A1:2010.
Materials: Polyolefin foam with the addition of ethylene vinyl acetate.

Rundstång är en varmvalsad, homogen stålstång med runt tvärsnitt. Rundstång lagerhålls i stålsort S235JR och S355J2. EN 10025:2004.

Flag set with 115 cm long white lacquered steel pole Ø19 mm with Swedish flag (60 cm printed). Bracket in composite material, yellow ball and removable plastic locking ring. 60° slope.
Material: Marine polyester.

DIN / ISO Norm: DIN 985 Low with nylon ring, quality 8 from. M24

Permanent marking pen with hardened acrylic tip for glass, porcelain, metal, plastic, wood, textile (wash-proof), foils, etc. Color-resistant ink - does not fade. 12 pcs/fp.

UV-resistant all-round protection and masking tape made of PVC. Suitable for masking indoor and outdoor painting and plastering work. It can also be used on aluminium. The tape also protects delicate surfaces against mechanical damage and is easily removable without leaving adhesive residues on most surfaces.

Slightly creped, durable and standard masking tape with natural rubber adhesive suitable for indoor painting tasks. Excellent adhesion strength that enables well-defined edges in painting jobs and is a reliable tool for professional painters. Can be torn off by hand and used for up to 7 days and is easy to remove after use.

Sanding paper disc for quick sanding of paint and wood. Exceptional grinding with Bosch Surface Structure. Grain alignment during production ensures aggressive cutting. The grain distribution is optimized for extra fast grinding. Combines sharp grains with technology that stops clogging, maintaining its good properties throughout its lifetime. With velcro fastening.

Made of a soft energy-absorbing polymer foam. With its special closed cell structure, the plug expands slowly and thereby fills the individual ear canal. The result is a hearing plug that effectively blocks out harmful and disturbing noise. Packed in pairs. Attenuation value SNR 31 dB.
Conforms to EN 352-2.

Maintenance-free mask with exhalation valve against dust and other particles. 3-field construction. It is light, hygienic and provides effective and comfortable protection. The mask can be folded and has an extra soft inner part that feels pleasant against the skin. The material of the nose pad is sweat absorbent. The headbands have constant elasticity and can be adjusted to most head sizes. The CPC exhalation valve facilitates exhalation and it reduces the build-up of heat, moisture and carbon dioxide in the mask. All the masks in the 9300 series are individually packed, for hygienic storage.
Conforms to EN 149:2001

Used for sealing and repairing windows with both single-glazed and insulated glass. Attaches and protects glass, metal and wood. The putty hardens into a protective film after a few days and under the skin the putty remains plastic. Termokitt 684 can be painted over.

Assembly glove made of hard-wearing artificial leather and upper part of polyester. With reinforced index finger and elastic band around the wrist for a better fit. The glove is unlined. Soft and flexible glove suitable for assembly work, warehouse work, various types of installation work and fine assembly work.

Approved/Certified according to:
CE category 2
EN 420:2003+ A1:2009
EN 388:2016+A1:2018 2131X

Tolerances: 6H.
Cutting chamfer: Form C (Step taper, 2-3 threads chamfered).
Groove design: Chip-pulling right-hand spiral 45 °.
Surface treatment: Glossy.
Area of ??use: For general threading, but advantageous for bottom threading.
ISO 529.

Alkylate gasoline pre-mixed with two percent of Aspen's fully synthetic 2-stroke oil. Used for various types of air-cooled two-stroke engines, such as chainsaws, clearing saws, cutters, hedge trimmers, etc. Is largely free of harmful components such as benzene and other aromatics. In addition to providing a better working environment for the user and minimizing harmful emissions, the engine is kept cleaner. The fuel minimizes carbon residue and deposits on engine parts, which provides smoother and more efficient operation. The engine will be easier to start, and the fuel will also withstand long-term storage. Extremely flammable.

Mini roles made of polyester. Gives a medium coarse texture. Suitable for any color. 12 mm bangs.

Svetsade precisionsstålrör är vanligt förekommande och används till lättare konstruktioner. Dessa rör känneteckas av tunn godstjocklek, måttnoggrannhet, snäva dimensionstoleranser och fina ytor. Rören är lämpliga för ytbehandlingar, såsom förkromning för kallbandstillverkade rör och varmförzinkning eller lackering för varmvalsade/betade rör. Normen EN 10305-5 gäller för kvadratiska och rektangulära dimensioner.

Flap disc for aggressive grinding of steel and stainless steel. High stock removal and good service life for universal, demanding processing. For surface grinding and machining of welding joints.
Abrasives: Zircon corundum Z.
Type 27A: Angled.

DIN / ISO Standard: DIN 934

Hub disc for surface and edge grinding in steel and stainless steel with an angle grinder. FastCut technology for high harvesting in a short time. Universal use.
Basic: Hub washer of basic quality.
Type 27: Recessed hub

KKR (CFRHS) står för Kallformade KonstruktionsRör (Cold Formed Rectangular Hollow Section) och är en kvadratisk eller rektangulär hålprofil som formats i rumstemperatur. Detta ger materialet en kallstukad struktur i hörnen, som måste utformas med större radie för att undvika sprickbildning. Hörnradien medför i sin tur konsekvenser som man måste ta hänsyn till vid sammanfogning. KKR har ofta inbyggda restspänningar som kan leda till att materialet slår sig vid exempelvis blästring eller svetsning. Jämfört med VKR har KKR fördelen av en lägre produktionskostnad samt en jämnare ytfinish. Stålsorten i de KKR-produkter som vi erbjuder från lager är till största delen dubbelklassade och uppfyller kraven för både S355J2H och S420 MH. Varvid den minsta sträckgränsen är 420 N/mm2.

Track design: Right, normal spiral, wide tracks.
Tip angle: 118° Special tip geometry (DORMER P.S. Point), provides better positioning accuracy.
Surface treatment: Blank body, TiN-coated cutting part.
Area of ??use: For normal drilling work.
DIN 338 RN / BS 328 / ISO 235.
* = Self-service packed.

Li-Ion battery with long operating time. Digital overload protection. Individual cell monitoring. Durable and shock-resistant construction. Can be used in temperatures down to -20°C without affecting operating time or battery life. Water-protected battery that transports the water away from the electronics and out of the battery. Battery indicator that shows the remaining power level.
Compatible with all Milwaukee M18 tools.

Orange, smooth outer rubber of SBR/NR with good abrasion and weather resistance. Spiralized synthetic inserts, inner tube of NBR/HSBR. Resistant to butane and propane, LPG (Liquid Petroleum Gas) and gas mixtures such as MPS and CNG. Meets the requirements according to EN 559 and the requirements of the explosives inspection.
Marking Semperit S EN 559 2 mPa (20 bar) dimension -30°C.
Area of ??use: Transport of LPG in gaseous form for gas-powered kitchens, lamps, refrigerators and for gas burners in laboratories and in industry when welding and cutting.
Temperature range: - 30°C - +70°C
*Supplied on the coil.

Unvarnished wooden shaft in birch. Used for brooms, piazza brooms or brooms with a wooden frame. 24 mm in diameter.

For medium strength locking of threaded parts. Recommended for nuts and bolts of all types. Oil resistant. Disassemble with normal hand tools.
Working temperature: -55°C - 150°C.
Thread size: M36. 
Fixing time : 30 minutes on steel parts. 
Breakaway torque: 20 Nm M10 screw. 
Maximum gap filling: 0.25 mm.< BR> We prioritize safety - according to European MSDS forms it requires 
- no warning symbols. 
- no danger phrases. 
- no safety phrases. 
- no notes in paragraphs 2, 3, 15 and 16.