Skor, Kängor, Stövlar

Sole with for daily use, while exercising and walking and standing at work. With advanced dynamic system that provides effective shock absorption and reduced pressure on the body. The arch support provides effective stability, relief and support for the longitudinal arch of the foot. The light blue material creates a dynamic function with its density, which provides the relief needed in every downstroke. At the same time, the material is shock-absorbing and reduces rotational forces during an active movement pattern, such as during sporting activities. Anatomical heel cup distributes pressure under the heel and reduces strain by contracting the heel's fat pad and enhancing its natural function. Shock-absorbing material made from two different densities of Power TPE gel. Top protection made of high-quality fabric, Super Nylex, with a smoothness that minimizes the risk of chafing and blisters. The soles are cut along the edge to the desired size.

Protective sandal with toe cap in composite and soft nail tread protection. Equipped with centrally located Fitgo quick lacing system with adjustable dial. The midsole in poured PU in combination with the XLRFlex sole provides good cushioning, supports the foot's natural movements and provides good comfort. The upper is in durable Ripstop Condura fabric, side panels with ventilating mesh. The outsole is made of durable nitrile rubber, which provides increased stability with a good grip. The sole can also withstand heat up to 300°C and is antistatic. Suitable for service, logistics and industry. 

Approved/Certified according to: 
EN ISO 20345:2011 (S1P, HRO, SRC)
EN ESD 61340-4-3:2018

Protective sandal with toe cap and nail tread protection in composite. Reinforced nose guard. Microfiber upper with breathable air mesh lining and mesh on the sides. Light and breathable Ortholite X25 insole that provides good cushioning. EVA midsole and outsole in nitrile rubber. Boa L6 lacing system.

Approved/Certified according to:
EN ISO 20345:2011 (S1P, SRC)
IEC 61340-5-1 - ESD

All-round sole with support and relief for heel and midfoot. Insole that provides comfortable support for the arched foot and shock absorption for the underside of the foot. Full sole designed to provide pleasant cushioning and comfort in most types of shoes. Upper surface layer in mesh and an underside made of PU and TPU with two pressure-relieving zones of PORON. For comfort and good stability, the sole is shaped after the heel. For normal arch.

Scented bags for fresher professional shoes and work equipment. Absorbs moisture, counteracts odors and leaves a long-lasting fresh scent. For professional shoes and other work equipment, but are adaptable and fit everywhere, creating unlimited areas of use. The inner bag is made of non-woven fabric that breathes and allows moisture to be transported from the surrounding environment. The outer material is made of recycled microfiber polyester and environmentally friendly paint has been used in the dyeing. Contains activated carbon made from bamboo and a patented mixture of minerals and absorbents, filled with a fresh scent. Natural and sustainable content. 100% free from toxins and is REACH certified for consumer safety and the environment. Duration up to 6 months, no expiry date on unopened packaging. Mixed colors. Available in two sizes. 2-pack.

Slip protection with 4 studs under the heel and 6 studs under the forefoot. The studs are made of stainless steel.

Impregnation spray for leather, suede, nubuck and textile.

Cushion that eliminates odor and prevents the growth of bacteria by effectively absorbing moisture. Suitable for use in shoes, bags and other equipment that can smell bad. 

Shoe brush with double-sided bristles.

Solid shoe grease that contains wild boar fat and is intended for slightly stronger shoes and boots. Moisturizes and impregnates the leather without giving any shine.

Shoe horn 60 cm.
Colour: Black

Polyethylene shoe cover. Thickness 0.03 mm. Food approved.

Approved/Certified according to:
EU Regulation 1935/2004
EU Regulation 2023/2006

#VALUE!

Warmly lined safety boot with aluminum toe cap and soft nail tread protection. H2O Blocker - a durable zipper with an effective barrier against sleet. Heat-insulating Thermolite, insole with comfortable fleece closest to the foot, reflex, excellent shock absorption, abrasion protection on the toe, a durable, heat-resistant nitrile rubber sole with very good grip. Antistatic properties.

Approved/Certified according to:
EN ISO 20345:2011 (S3, SRC, HRO, CI)

Waterproof safety boot with toe cap in composite and soft nail tread protection. Leather upper with Ripstop Condura and XLRTec membrane that makes the boot waterproof with a pleasant ventilation function. Fitgo quick lacing with adjustable dial. Midsole with XLRFlex which provides good cushioning, supports the foot's natural movements and provides good comfort. Outsole in durable nitrile rubber which provides increased stability with good grip, heat resistant up to 300°C. Antistatic properties. Suitable for crafts, construction, industry, contracting and service.

Approved/Certified according to:
EN ISO 20345:2011 (S3, WR, HRO, SRC)

Winter lined and waterproof protective boot equipped for Nordic climate. Toe cap in composite and soft nail tread protection. Leather upper with Ripstop Condura and XLRTec membrane that makes the boot waterproof with a pleasant ventilation function. Fitgo quick lacing with adjustable dial. Midsole with XLRFlex which provides good cushioning, supports the foot's natural movements and provides good comfort. Outsole in durable nitrile rubber which provides increased stability with good grip, heat resistant up to 300°C. Antistatic properties. Suitable for crafts, construction, industry, contracting and service.

Approved/Certified according to:
EN ISO 20345:2011 (S3, CI, WR, HRO, SRC)

Metal-free safety boot in hiker model. Toe cap made of carbon-light polycarbonate material (200 J according to DIN 12568). Made of nubuck leather with very good resistance to water and oils. Midsole with metal-free nail tread protection made of Q-flex material, resistance up to 1100 Newton. Oil- and slip-resistant outsole made of PU. With removable inner sock for best comfort and a closed tongue that prevents dust or liquid from getting into the boot. Equipped with Hydratec - waterproof membrane.

Approved/Certified according to:
EN ISO 20345:2011 (S3, SRC)

Safety boot with composite toe cap and steel nail tread protection. Heat-resistant, water-repellent upper in PU-coated leather. Kevlar thread in the seams that can withstand 427°C short-term heat exposure and 204°C long-term heat exposure. ProNose toe wear protection in PU. Padded shaft. Ventilating insole in textile with soft EVA, electrically conductive polyester thread and double shock absorption zones in Poron. PU midsole. Ergothan shock absorption system. Heat- and oil-resistant outsole in nitrile. BOA lacing mechanism. Antistatic properties.

Approved/Certified according to:
EN ISO 20349-2:2017 (S3, SRC, HRO, CI, HI, WG)

Water-repellent, warm protective boot for winter use, with very good grip even in low temperatures. With composite toe cap and spike protection made of plasma-treated textile. Heat-resistant upper in PU-coated leather. Lining in polyester fur. ProNose toe wear protection in PU. Insole in textile with merino wool, and double shock absorption zones. PU midsole with plastic link. Metal-free, heat- and oil-resistant outsole. Antistatic properties. Lacing, pull loops, bellows tongue, padded shaft and shaft edge. Ankle protection, ankle support and reflexes. Regular fit.

Approved/Certified according to:
EN ISO 20345:2011 (S3, SRC, HRO, CI, HI, AN)
IEC 61340-5- 1 - ESD

Light and flexible protective boot with insulating lining of PrimaLoft Bio, temperature-regulating material and wool that keeps the cold out all day. With aluminum toe cap and soft nail tread protection made of plasma-treated textile. Water-repellent nubuck upper. Drawstrings, padded shaft, bellows and ankle protection. FX2 ThermAL ventilating insole. PU midsole. Oil-resistant outsole with RPU outsole. Ergothan shock absorption system. BOA Fit System. Regular fit. Antistatic properties. 

Approved/Certified according to: 
EN ISO 20345:2022 (S3S, SR, CI)

Protective boot with BOA closure on the side. Aluminum toe cap. Water-repellent upper with microfiber that protects against wear. Lining in polyamide that breathes and absorbs moisture. Ergothan shock absorption system with 4-layer insole and Poron XRD for comfort and shock absorption. Heat- and oil-resistant outsole in nitrile rubber with good anti-slip protection. Nail tread protection made of plasma-treated textile. Stabilizer. Antistatic properties.

Approved/Certified according to:
EN ISO 20345:2011 (S3, SRC, HRO)
IEC 61340-5-1 - ESD

Waterproof safety boot with toe cap in aluminum and soft nail tread protection in plasma-treated textile. Upper in microfiber, with Gore-Tex membrane and lining in polyamide. Reinforced toe wear protection. Padded shaft. Ventilating insole FX3 Supreme with shock absorption in Poron XRD. Ergothan shock absorption system with dual shock absorption zones. Plastic link and stabilizer. Heat- and oil-resistant Vibram outsole in nitrile rubber. Boa lacing system. Antistatic properties.

Approved/Certified according to:
EN ISO 20345:2011 (S3, SRC, WR, HRO)
IEC 61340-5-1 - ESD

Protective boot for winter use. Water-resistant upper in leather with side panels in Canvas fabric. Zipper and windproof bellows on the inside. Lining in synthetic wool. Inner sole made of PU provides good cushioning and good insulation. Toe cap made of composite and soft nail tread protection Pantzar APT (Anti Puncture Textile). Outsole in TPU and midsole in PU. Wide read. Antistatic properties.

Approved/Certified according to:
EN ISO 20345:2011 (S3, SRC, CI)

Warmly lined safety boot with steel spike protection and aluminum toe cap. Water-repellent upper in PU-coated leather. Thermal insulation with PrimaLoft. Insole with aluminum membrane reflects cold to the outside and heat to the inside. Middle layer of shock-absorbing FlexStep material. Oil, chemical and heat resistant outsole with good grip. Memory foam supports and protects the ankle against impacts. Antistatic properties. BOA lacing mechanism. Size 39-47 with extra wide last.

Approved/Certified according to:
EN ISO 20345:2011 (S3, SRC, HRO, CI)
IEC 61340- 5-1 - ESD

Ankle-high safety boot with high wearing comfort and steel spike protection. Maximum breathability and waterproofness with Gore-Tex. Easy and even closing of the shoes with Boa lacing mechanism. Composite toe cap. Antistatic properties.

Approved/Certified according to:
EN ISO 20345:2011 (S3, SRC)

Safety boot with composite toe cap and steel nail tread protection. Water-repellent upper in microfiber. The elasticity element FlexEnergy is visible in the openings in the shoe's heel, which enables greater mobility for the element and thereby increases the shoe's flexibility. In the ankle part, there is Poron XRD padding that molds to the foot, supports the ankle and dampens shocks against it. Insole in three layers, a soft upper material, the middle layer that breathes and the bottom layer of EVA that is light and shock-absorbing. The Sievi TractionPro friction sole ensures a good grip. The sole is oil and chemical resistant and heat resistant up to 300°C. Boa lacing mechanism. Antistatic properties. 

Approved/certified according to: 
EN ISO 20345:2022 (S3, FO, HRO, SC, SR)
IEC 61340- 5-1 - ESD

Vernesandal med tåhette i kompositt og metallfri spikerbeskyttelse. Tå- og hælforsterkning i TPU. Overdel i mikrofiber med åpne meshpaneler. Fukttransporterende og ventilerende fôr. Lett og ventilerende innersåle i PU med åpne celler, som også gir demping og god fuktighetshåndtering. Yttersåle med HELLYGRIP-gummi gir godt grep. Snøresystem Boa Fit System L6.

Godkjent/sertifisert i henhold til: 
EN ISO 20345:2022 (S1PS, FO, HRO, SR) 
IEC 61340-4-3:2018 - ESD

Protective sandal with aluminum toe cap, grippy sole, velcro closure and advanced shock absorption. For industry and workshops. Ergothan Hypersorb, Velcro closure, adjustable ankle strap, antistatic, light weight.

Approved/Certified according to:
EN ISO 20345:2011 (S1, SRC)

Protective sandal with toe cap in composite and nail tread protection in composite PS. Upper in PU-coated leather and microfiber. 3D-dry lining improves moisture management and breathability. Insole DUAL Comfort with Poron cushioning pads under the foot pad and heel. Oil- and chemical-resistant outsole with good grip, made of FlexStep material that provides high shock absorption. The sole is heat resistant up to 120°C. Elastic heel made of FlexStep material. Velcro closure. Metal-free. Antistatic properties.

Approved/Certified according to: 
EN ISO 20345:2022 (S1PS, FO, SC) 
IEC 61340-5- 1 - ESD

A flexible metal-free safety sandal made of black nubuck leather. Soft instep protection and toe cap made of carbon-light material. With mesh Poromax lining - which means that the sandal gets an even temperature distribution and warm, moist air is transported away. Flexible insole made of Q-flex material with perforation resistance and thermal insulation. Interchangeable insole with antistatic properties. Outer sole made of two layers of PU - an outer layer that provides good grip, and an inner layer for soft shock absorption and comfort.

Approved/Certified according to:
EN ISO 20345: 2011 (S1P, SRC)

Nice and airy protective shoe with Boa lacing system. Upper in full-grain, impregnated Super8 leather. Ventilating polyamide mesh and airy mesh tongue. PU abrasion protection on the toe. Lightweight aluminum toe cap and soft nail tread protection. Lining of airy mesh, durable, quick-drying Cambrelle in the heel and under the lacing area. Binding sole with steel rail in the hollow foot for support and stability. Combination of full Ortholite X-40 Duo insole and Energy Gel 2.0 in the heel for maximum shock absorption, exceptional rebound and break-in feel. symetrix wear sole, functional sole in PU with nitrile rubber in the heel for excellent slip resistance. Very spacious read.

Approved/Certified according to:
EN ISO 20345:2011 (S1P, SRA)
IEC 61340-5-1 - ESD

Safety shoe with light aluminum toe cap and soft nail tread protection. Upper in full-grain, impregnated Super8 leather with suede details. Durable Cordura. Abrasion protection on the toe. Airy mesh lining, durable microfiber in the back. Footbed of binding sole with steel rail in the hollow foot for support and stability. Full Ortholite X-40 insole with extra cushioning. Energy Gel Duo for superb shock absorption in both the heel and the tread. Wear sole from Asymetrix, functional sole in PU with nitrile rubber in the heel for excellent slip resistance. Very spacious read.

Approved/Certified according to:
EN ISO 20345:2011 (S3, SRC)
IEC 61340-5-1 - ESD

Extra airy protective shoe suitable for work outdoors in summer. Upper in full-grain, impregnated Super8 leather. Ventilating polyamide mesh and airy mesh tongue. Boa lacing system. Abrasion protection on the toe. Lightweight aluminum toe cap. Lining in airy mesh and with durable, quick-drying Cambrelle in the heel. Binding sole with steel rail in the hollow foot. Insole Ortholite X-40 and gel cushion in the heel. Soft metal-free nail tread protection. Antistatic. Slip-on PU midsole and heat- and oil-resistant nitrile rubber outsole. Very spacious read.

Approved/Certified according to:
EN ISO 20345:2011 (S1P, SRC, HRO)
IEC 61340-5-1 - ESD

Safety shoe with composite toe cap and soft spike protection. Equipped with Fitgo quick lacing system with adjustable dial. Midsole with XLRFlex provides good cushioning, supports the foot's natural movements and provides good comfort. The upper part is in durable Ripstop Condura fabric. The outsole is made of durable nitrile rubber, which provides increased stability with a good grip. The sole can also withstand heat up to 300°C and is antistatic. Suitable for service, logistics and industry.

Approved/Certified according to:
EN ISO 20345:2011 (S1P, HRO, SRC) 
IEC 61340- 4-3 - ESD

Safety shoe with toe cap in composite and soft nail tread protection. Midsole with XLRFlex provides good cushioning, supports the foot's natural movements and provides good comfort. Equipped with quick lacing, the upper is in durable ripstop Condura fabric. The wear sole is made of durable nitrile rubber, which provides increased stability with a good grip, the sole can also withstand heat up to 300°C and is antistatic. Perfectly suited for work in service, logistics and industry.

Approved/Certified according to:
EN ISO 20345:2011 (S1P, HRO, SRC)
IEC 61340-4-3 - ESD

Safety shoe with toe cap in composite and soft nail tread protection. Midsole with XLRFlex provides good cushioning, supports the foot's natural movements and provides good comfort. Water-resistant leather upper with Ripstop Condura. The wear sole is made of durable nitrile rubber which provides increased stability with a good grip, the sole can also withstand heat up to 300°C and is antistatic.

Approved/Certified according to:
EN ISO 20345:2011 (S3, HRO, SRC) 
IEC 61340-4-3 - ESD

Waterproof safety shoe with toe cap in composite and soft nail tread protection. Upper in leather with Ripstop Condura and XLRTec membrane that makes the shoe waterproof with a pleasant ventilation function. Equipped with Fitgo quick lacing system with adjustable dial. Midsole with XLRFlex which provides good cushioning, supports the foot's natural movements and provides good comfort. Outsole in durable nitrile rubber which provides increased stability with good grip, heat resistant up to 300°C. Antistatic properties. Suitable for crafts, construction, industry, contracting and service.

Approved/Certified according to:
EN ISO 20345:2011 (S3, WR, HRO, SRC)

Metal-free safety shoe with lacing, made of full-grain - high-quality leather. Good resistance to water and oils. Toe cap made of carbon-light polycarbonate material. Lining of ventilating mesh. Insole with antistatic properties. The sole is odorless, quick-drying and antibacterial, with support for arched feet. Nail tread protection without metal, made of Q-flex material. Outsole made of two layers of PU, an outer layer with good grip and abrasion resistance, and an inner layer with soft shock absorption and better comfort.

Approved/Certified according to:
EN ISO 20345:2011 (S3, SRC, WR)

Light safety shoe with high comfort. composite toe cap and a metal-free nail tread guard. The BOA clasp provides increased security. Breathable mesh lining. EPR midsole and abrasion and anti-slip rubber outsole. The inner sole is made of PU with extra shock-absorbing gel inlay.

Approved/Certified according to:
EN ISO 20345:2011 (S3, SRC)
IEC 61340-5-1 - ESD

Light safety shoe with metal-free nail tread protection and aluminum toe cap. Upper in synthetic and Helly Tech material that is waterproof and breathable. BOA closure system. Midsole in EVA/EPR. Outsole in rubber and nitrile, resistant to oil, fuel and other chemicals. The outsole has good grip and does not leave marks on the surface.

Approved/Certified according to:
EN ISO 20345:2011 (S3, SRC)
IEC 61340-5- 1 - ESD